Samsung TV Replacement Remote – URC 1910

No. The Samsung Replacement remote has been specifically designed to work with Samsung televisions only.

Generally, the Samsung Replacement remote can only perform the exact same functions as the original remote. This means that no new features will be added to your TV, and the keys will most likely have no function.You can, however, use these keys for learning purposes.

If not all buttons are mapped correctly, this could mean the current setup you’re using isn’t optimized for the Samsung TV model you have. Please follow the instructions in the manual for a “Second Tier Search” and hold down the key that isn’t working during this search.

You can use the learning function of the Samsung Replacement remote, by following the instructions in the manual, which can be found in the manual tab above.

If you would like to delete a learned function on your Samsung Replacement remote that you no longer require, please read the delete learning section in the manual, which can be found in the manual tab above.

A long blink indicates that the Samsung Replacement remote failed to learn the signal from the original remote. There could be a number of reasons for this.Firstly, check the original remote is working correctly.
Next, make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere.
Also ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.Finally if the batteries in your remote are low, this could cause the unit to exit the programming mode. Try with some new batteries if available.

The Samsung Replacement remote does not have its own way of tuning in the channels. This depends entirely on how the tuning was done with the original remote. You should find instructions on how to do the tuning in your TV user manual.If you no longer have the user manual, nor the original remote, and you do not know exactly how the tuning was done, please contact the TV manufacturer for assistance. Quote your TV model number and either ask them to replace the manual, or ask them to tell you, step by step, how you would tune the TV stations when using the original remote control.If you require special functions for tuning the channels, you can contact our Customer Support Team by clicking the link below. We will need to know how these keys were labeled (i.e., name, symbol, color, etc…) on the original TV remote control.